02-536-7857-9  |  Line: @nut.skf  |  8.00-17.00 (จันทร์-เสาร์ครึ่งวัน)

หมวดหมู่สินค้า -

Brands -

Filter by price

หมวดหมู่สินค้า -

Brands -

Filter by price

โทร: 02-536-7857-9  |  Line: @nut.skf  |  8.00-17.00 (จันทร์-เสาร์ครึ่งวัน)

Loading...

SKF SNL 516-613 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)

ขายแล้ว 202 ชิ้น
รหัสสินค้า: SNL 516-613 หมวดหมู่: , Brand:

฿2,937.00

ราคายังไม่รวมภาษีมูลค่าเพิ่ม (VAT) 7%

SKF SNL 516-613 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)
ID 92.5 x H 177 x L 315

– Attachment bolt diameter (ขนาดสกรูน็อตยึดฐาน) : 20 mm
– Centre distance between bolt holes (เซ็นเตอร์รูน็อต) : 260 mm
– Centre height (ส่วนสูงจากฐานถึงกลางเสื้อ) : 95 mm
– Housing type (ชนิดเสื้อ) : Plummer/Pillow block
– Material, housing (วัสดุตัวเสื้อ) : Cast iron
– Number of bolt holes for fasteners (จำนวนรูน็อตที่ฐานเสื้อ) : 2 holes
– สินค้าบรรจุ 1 ตัว

Availability: มีสินค้าอยู่ 32

Loading...

SKF SNL 516-613 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)
ID 92.5 x H 177 x L 315

  • Attachment bolt diameter (ขนาดสกรูน็อตยึดฐาน) : 20 mm
  • Centre distance between bolt holes (เซ็นเตอร์รูน็อต) : 260 mm
  • Centre height (ส่วนสูงจากฐานถึงกลางเสื้อ) : 95 mm
  • Housing type (ชนิดเสื้อ) : Plummer/Pillow block
  • Material, housing (วัสดุตัวเสื้อ) : Cast iron
  • Number of bolt holes for fasteners (จำนวนรูน็อตที่ฐานเสื้อ) : 2 holes
  • สินค้าบรรจุ 1 ตัว

ทำไมควรซื้อกับเรา:

  • จัดจำหน่ายโดยตัวแทนจำหน่ายอย่างเป็นทางการของ SKF ประเทศไทย
  • มีประสบการณ์จำหน่ายสินค้ากลุ่มอุตสาหกรรมมามากกว่า 30 ปี
  • สินค้า SKF แท้ 100%
  • มีสินค้าพร้อมส่ง
  • ตอบทุกคำถามเทคนิค
น้ำหนัก10 กก.

ข้อมูลจำเพาะทางเทคนิค

Dimensions
Bearing seat
Da140 mmDiameter of bearing seat
G7Tolerance class of bearing seat diameter
Ca58 mmWidth of bearing seat
H195 mmCentre height of bearing seat
Outside dimensions
Db92.5 mmBore diameter
A120 mmOverall width
A190 mmFoot width
G11/8-27 NPSFThread of relubrication holes
H176 mmOverall height
H232 mmFoot height
L315 mmOverall length
J260 mmDistance between attachment bolts
N28 mmLength of attachment bolt hole
N122 mmWidth of attachment bolt hole
Seal grooves
A393 mmInside width between seal grooves
A45 mmWidth of seal groove
A59 mmDistance to seal groove back face
A613 mmWidth at bore diameter
Dc101 mmDiameter of seal groove
Dowel pins
J6288 mmDistance between dowel pins
J733 mmAxial offset of dowel pins
N4max.8 mmDiameter of dowel pins
Calculation data
Breaking loads
P0°350 kNBreaking load at 0° load angle (if the housing is not supported over its entire base)
P55°430 kNBreaking load at 55° load angle
P90°260 kNBreaking load at 90° load angle
P120°190 kNBreaking load at 120° load angle
P150°175 kNBreaking load at 150° load angle
P180°215 kNBreaking load at 180° load angle
Pa140 kNBreaking load, axial
Yield points of cap bolts
Q120°220 kNLoad to reach yield point at 120° load angle
Q150°125 kNLoad to reach yield point at 150° load angle
Q180°110 kNLoad to reach yield point at 180° load angle
Materials
Housing materialCast iron
Corrosion protectionPaint - in accordance with ISO 12944-2, corrosivity category C2
Mounting information
Recommended diameter of attachment boltsG20 mm
Recommended tightening torque for attachment bolts385 N·m
Size of cap boltsM12x70
Tightening torque for cap bolts80 N·m
Initial grease fill, 20%170 g
Initial grease fill, 40%280 g
Included products
Grease fittingAH 1/8-27 PTF
preloader