02-536-7857-9  |  Line: @nut.skf  |  8.00-17.00 (จันทร์-เสาร์ครึ่งวัน)

หมวดหมู่สินค้า -

Brands -

Filter by price

หมวดหมู่สินค้า -

Brands -

Filter by price

โทร: 02-536-7857-9  |  Line: @nut.skf  |  8.00-17.00 (จันทร์-เสาร์ครึ่งวัน)

Loading...

SKF SNL 511-609 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)

ขายแล้ว 352 ชิ้น
รหัสสินค้า: SNL 511-609 หมวดหมู่: , Brand:

฿1,788.00

ราคายังไม่รวมภาษีมูลค่าเพิ่ม (VAT) 7%

SKF SNL 511-609 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)
ID 67 x H 127 x L 255

– Attachment bolt diameter (ขนาดสกรูน็อตยึดฐาน) : 16 mm
– Centre distance between bolt holes (เซ็นเตอร์รูน็อต) : 210 mm
– Centre height (ส่วนสูงจากฐานถึงกลางเสื้อ) : 70 mm
– Housing type (ชนิดเสื้อ) : Plummer/Pillow block
– Material, housing (วัสดุตัวเสื้อ) : Cast iron
– Number of bolt holes for fasteners (จำนวนรูน็อตที่ฐานเสื้อ) : 2 holes
– สินค้าบรรจุ 1 ตัว

Availability: มีสินค้าอยู่ 50

Loading...

SKF SNL 511-609 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)
ID 67 x H 127 x L 255

  • Attachment bolt diameter (ขนาดสกรูน็อตยึดฐาน) : 16 mm
  • Centre distance between bolt holes (เซ็นเตอร์รูน็อต) : 210 mm
  • Centre height (ส่วนสูงจากฐานถึงกลางเสื้อ) : 70 mm
  • Housing type (ชนิดเสื้อ) : Plummer/Pillow block
  • Material, housing (วัสดุตัวเสื้อ) : Cast iron
  • Number of bolt holes for fasteners (จำนวนรูน็อตที่ฐานเสื้อ) : 2 holes
  • สินค้าบรรจุ 1 ตัว

ทำไมควรซื้อกับเรา:

  • จัดจำหน่ายโดยตัวแทนจำหน่ายอย่างเป็นทางการของ SKF ประเทศไทย
  • มีประสบการณ์จำหน่ายสินค้ากลุ่มอุตสาหกรรมมามากกว่า 30 ปี
  • สินค้า SKF แท้ 100%
  • มีสินค้าพร้อมส่ง
  • ตอบทุกคำถามเทคนิค
น้ำหนัก5.5 กก.

ข้อมูลจำเพาะทางเทคนิค

Dimensions
Bearing seat
Da100 mmDiameter of bearing seat
G7Tolerance class of bearing seat diameter
Ca44 mmWidth of bearing seat
H170 mmCentre height of bearing seat
Outside dimensions
Db67 mmBore diameter
A95 mmOverall width
A170 mmFoot width
G11/8-27 NPSFThread of relubrication holes
H127 mmOverall height
H228 mmFoot height
L255 mmOverall length
J210 mmDistance between attachment bolts
N24 mmLength of attachment bolt hole
N118 mmWidth of attachment bolt hole
Seal grooves
A370 mmInside width between seal grooves
A45 mmWidth of seal groove
A59 mmDistance to seal groove back face
A612 mmWidth at bore diameter
Dc75.5 mmDiameter of seal groove
Dowel pins
J6234 mmDistance between dowel pins
J724.5 mmAxial offset of dowel pins
N4max.8 mmDiameter of dowel pins
Calculation data
Breaking loads
P0°190 kNBreaking load at 0° load angle (if the housing is not supported over its entire base)
P55°275 kNBreaking load at 55° load angle
P90°170 kNBreaking load at 90° load angle
P120°125 kNBreaking load at 120° load angle
P150°115 kNBreaking load at 150° load angle
P180°140 kNBreaking load at 180° load angle
Pa90 kNBreaking load, axial
Yield points of cap bolts
Q120°220 kNLoad to reach yield point at 120° load angle
Q150°125 kNLoad to reach yield point at 150° load angle
Q180°110 kNLoad to reach yield point at 180° load angle
Materials
Housing materialCast iron
Corrosion protectionPaint - in accordance with ISO 12944-2, corrosivity category C2
Mounting information
Recommended diameter of attachment boltsG16 mm
Recommended tightening torque for attachment bolts200 N·m
Size of cap boltsM12x60
Tightening torque for cap bolts80 N·m
Initial grease fill, 20%55 g
Initial grease fill, 40%90 g
Included products
Grease fittingAH 1/8-27 PTF