02-536-7857-9  |  Line: @nut.skf  |  8.00-17.00 (จันทร์-เสาร์ครึ่งวัน)

หมวดหมู่สินค้า -

Brands -

Filter by price

หมวดหมู่สินค้า -

Brands -

Filter by price

โทร: 02-536-7857-9  |  Line: @nut.skf  |  8.00-17.00 (จันทร์-เสาร์ครึ่งวัน)

Loading...

SKF SNL 510-608 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)

ขายแล้ว 63 ชิ้น
รหัสสินค้า: SNL 510-608 หมวดหมู่: , Brand:

฿1,453.00

ราคายังไม่รวมภาษีมูลค่าเพิ่ม (VAT) 7%

SKF SNL 510-608 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)
ID 62 x H 113 x L 205

– Attachment bolt diameter (ขนาดสกรูน็อตยึดฐาน) : 12 mm
– Centre distance between bolt holes (เซ็นเตอร์รูน็อต) : 170 mm
– Centre height (ส่วนสูงจากฐานถึงกลางเสื้อ) : 60 mm
– Housing type (ชนิดเสื้อ) : Plummer/Pillow block
– Material, housing (วัสดุตัวเสื้อ) : Cast iron
– Number of bolt holes for fasteners (จำนวนรูน็อตที่ฐานเสื้อ) : 2 holes
– สินค้าบรรจุ 1 ตัว

Availability: มีสินค้าอยู่ 11

Loading...

SKF SNL 510-608 เสื้อตุ๊กตาแบบ Plummer Block (ฝาประกบ)
ID 62 x H 113 x L 205

  • Attachment bolt diameter (ขนาดสกรูน็อตยึดฐาน) : 12 mm
  • Centre distance between bolt holes (เซ็นเตอร์รูน็อต) : 170 mm
  • Centre height (ส่วนสูงจากฐานถึงกลางเสื้อ) : 60 mm
  • Housing type (ชนิดเสื้อ) : Plummer/Pillow block
  • Material, housing (วัสดุตัวเสื้อ) : Cast iron
  • Number of bolt holes for fasteners (จำนวนรูน็อตที่ฐานเสื้อ) : 2 holes
  • สินค้าบรรจุ 1 ตัว

ทำไมควรซื้อกับเรา:

  • จัดจำหน่ายโดยตัวแทนจำหน่ายอย่างเป็นทางการของ SKF ประเทศไทย
  • มีประสบการณ์จำหน่ายสินค้ากลุ่มอุตสาหกรรมมามากกว่า 30 ปี
  • สินค้า SKF แท้ 100%
  • มีสินค้าพร้อมส่ง
  • ตอบทุกคำถามเทคนิค
น้ำหนัก4 กก.

ข้อมูลจำเพาะทางเทคนิค

Dimensions
Bearing seat
Da90 mmDiameter of bearing seat
G7Tolerance class of bearing seat diameter
Ca41 mmWidth of bearing seat
H160 mmCentre height of bearing seat
Outside dimensions
Db62 mmBore diameter
A90 mmOverall width
A160 mmFoot width
G11/8-27 NPSFThread of relubrication holes
H113 mmOverall height
H225 mmFoot height
L205 mmOverall length
J170 mmDistance between attachment bolts
N20 mmLength of attachment bolt hole
N115 mmWidth of attachment bolt hole
Seal grooves
A365 mmInside width between seal grooves
A45 mmWidth of seal groove
A59 mmDistance to seal groove back face
A612 mmWidth at bore diameter
Dc70.5 mmDiameter of seal groove
Dowel pins
J6188 mmDistance between dowel pins
J722 mmAxial offset of dowel pins
N4max.6 mmDiameter of dowel pins
Calculation data
Breaking loads
P0°170 kNBreaking load at 0° load angle (if the housing is not supported over its entire base)
P55°265 kNBreaking load at 55° load angle
P90°155 kNBreaking load at 90° load angle
P120°120 kNBreaking load at 120° load angle
P150°110 kNBreaking load at 150° load angle
P180°130 kNBreaking load at 180° load angle
Pa85 kNBreaking load, axial
Yield points of cap bolts
Q120°150 kNLoad to reach yield point at 120° load angle
Q150°85 kNLoad to reach yield point at 150° load angle
Q180°75 kNLoad to reach yield point at 180° load angle
Materials
Housing materialCast iron
Corrosion protectionPaint - in accordance with ISO 12944-2, corrosivity category C2
Mounting information
Recommended diameter of attachment boltsG12 mm
Recommended tightening torque for attachment bolts80 N·m
Size of cap boltsM10x55
Tightening torque for cap bolts50 N·m
Initial grease fill, 20%45 g
Initial grease fill, 40%70 g
Included products
Grease fittingAH 1/8-27 PTF